|
|
|||||
|
|
|
|
|
AROVISION attachment
system specification
 |
Fixed
attachment system for main street sign |
|
|
The fixed Aerovision 230 attachment system (or approved equivalent) should be aluminum molded type A-A 356.1 T-6 to be installed inside an Aerovision 230 street name identification sign (or approved equivalent). The attachment system should fit on either a round pole with a minimal outer diameter of 58 mm (2 3/8''), a lamp post or a flat surface.
|
||
 |
Flexible
attachment system for main street sign |
|
The flexible Aerovision 230 attachment system (or approved equivalent) should be aluminum molded type A-A 356.1 T-6 to be installed inside an Aerovisiontm 230 street name identification sign (or approved equivalent). The attachment system should fit on either a round pole with a minimal outside diameter of 58 mm (2 3/8''), a lamp post or a flat surface. The flexible
attachment system will be made of one compression spring mounted on a
pivot nylon coupler to allow a controlled course from a determinate starting
point.
|
|
 |
Flexible
attachment system for decorative plate |
|
|
The flexible Aerovisiontm 150 attachment system (or approved equivalent) should be aluminum molded type A-A 356.1 T-6 to be used with ornamental signs with a maximum thickness of .160 in. The flexible
attachment system will be made of one compression spring mounted on a
pivot nylon coupler to allow a controlled course from a determinate starting
point.
|
||
 |
Attachment
system for borough identification sign |
|
|
The Aerovision Aerial 300 attachment system (or approved equivalent) should be aluminum molded type A-A 356.1 T-6 on either a round pole with a minimal outer diameter of 58 mm (2 3/8''), a lamp post or a flat surface
|
||
 |
Attachment system for residential area sign | |
|
The Aerovision tm 150 attachment system (or approved equivalent) should be aluminum molded type A-A 356.1 T-6 to support one Aerovision tm 150 sign (or approved equivalent) or more. Single Aerovision
tm 150 for round poles
|
||
 |
Horizontal bracket arm | |
|
The Aerovision tm 300 type bracket arm (or approved equivalent) should be a non tapered elliptical shaped aluminum molded type 6063 T-6, unpainted and unbrushed. Standard or advanced signal type according to location requirements. Horizontal bracket arm to be installed on either wood or metal pole. The bracket
arm length depends on the size of the sign to be installed
|
||
 |