Driver inattention is the number one cause of road accidents in North America. The School Zone Flashing Beacon, with its ultra-bright LEDs, captures drivers attention at crosswalks, school zones and critical traffic intersections. The School Zone Flashing Beacon also serves an educational purpose, reinforcing existing road signs with customizable flashing patterns.
THIN & LIGHT
QUICK & EASY
DRY CONTACT ACTIVATION
The controller is equipped with a “dry contact” entry port for any type of external detector. Example: pedestrian detectors, temperature detectors, speed detectors, etc. When the detector is enables the dry contact, the flashing beacon activates according to the specified parameters.
Every triggered event will be recorded inside the controller. It is possible to keep track of the beacon status for previous periods of time, and it is possible to export the data into CSV formatted files.
EASY WIRELESS DEVICE PAIRING
Weather you need to pair a remote or pair two beacons together, the process is quick and simple. Piano interrupters installed on the controller makes it easy to link devices together. This setup makes it possible to configure pairing without computers.
Each controller features an integral calendar that enables it to start and stop the beacon on specific times and dates. Outside of working hours, the beacon can be activated with a paired device, which can be very useful in school zone areas.
To simplify configuration, prerecorded blinking beacon modes are available and prerecorded in the controller. The piano switch installed on the controller allows a fast, easy and reliable setup for the manufacturer as well as the installer.
RAPID FLASH TRAFFIC SIGN TECHNICAL SPECIFICATIONS
OPTIONS : ACTIVATION
FOR CROSSING GUARD
(-2 DAYS OF AUTONOMY)
OPTIONS : POWER SUPPLY
CURRENT CONVERSION KIT
120 V À 12 V,
IP67 WITH BATTERY
OPTIONS : ACCESSORIES
ADAPTOR, TELESPAR 2″
36318 : Yellow Panel with Amber LEDs
Panels : Aluminium 5052-H38, 3 mm (0,100″)
Reflective Sheeting : 3M High Intensity Prismatic D 4956-09 ASTM type IV
Visors : Aluminium, Textured Black Powder Coated
Lens : UV Stabilized Clear PVC
Environmental Protection : IP67
Box : 305 x 610 x 203 mm (12 x 24 x 8″)
Weight : 3,6 kg (8 lb)
(300 cycles of 20 sec./day)
20 W : with remote
30 W : calendar or 12h/24
50 W : 24h/24
Beacon lens : 200 mm (8″) or 300 mm (12″) diameter, Amber or Red LEDs
Standard : ITE VTCSH-STD 2005
Auto Brightness : Various Stages of Brightness for Day or Night (can be manually disabled)
Controller : Built-in
Controller Input Voltage : 9.6 to 14 VDC
Snap-in, Overmolded IP67 Connector, 10 mm OD
Flash Patterns : MUTCD (0.5 sec ON, 0.5 sec OFF), Solar Power Mode or Rapid Flash
Beacon control : Wig-Wag or Simultaneous
24 hrs, Night Only or Optional Activation
Operational Temp. : -40 to +74°C (-40 to +165°F)
Two (2) year limited warranty for defects on parts and labor.
Hardware included for round post 2-3/8″ or round post 4″ and more.